When you first notice wrinkles in your carpet you should get your carpet stretched. Delaying the carpet stretching job can lead to permanent damage. If it stays to long the carpet may not ever lay flat again. The second reason to stretch your carpet right away is because over time as people step on the carpet wrinkle it will start to crack and then rip. Lastly it can be a health issue especially for the elderly. I my self have fallen from getting my foot caught. When the carpet snags your foot it is easy to loose balance and those who are older are more susceptible to this.
A simple way to know if it’s time to stretch is go to the center of the room and grab the carpet. Try to lift it up and then let go. If the carpet does not snap right back into place then you need to have your carpet re-stretched. It is important to do because it is an eye soar but also will actually decrease the life of the carpet.
To repair this, the carpet must be re-stretched. A carpet installation company can do this by coming out and removing the carpet from the tacks on the end and then stretching the carpet out again. Often times the carpet must be cut at the edges to remove the wrinkles. This process can be just as intensive as first installing the carpet. Carpet is always stretched taught during the first installation, to ensure that it covers the floor evenly and smoothly.
Once your carpet starts to ripple, it’ll only keep getting worse. That’s because carpet is intended to lay flat at all times; a small ripple not only puts more wear and tear on the carpet, but causes it to move when you walk across it. That movement causes—you guessed it—more ripples. Soon your carpet will begin to look more like an ocean than a floor, and that’s a problem. If you find yourself in that situation, don’t worry. You probably won’t need to replace the carpet. For the most part, stretching it will remove the buckles and return it to its natural state as a flat, attractive floor covering. Carpet stretching is a very common carpet repair task. Carpet stretching is simple in theory: it involves pulling up the edges of the carpet, re-stretching the carpet so it’s properly taught, trimming any excess that’s been created, and re-securing the carpet in its new place. But in practice, it’s a considerably involved process, involving unique tools and proper technique to actually accomplish a successful carpet stretch.